Menu Open Menu

Case Studies

Take a look at some of the work we have completed over the years...

Supply & Installation of 2 Tonne Crane and Supporting Gantry

Crane & Gantry Bespoke Engineering Services were successful in their bid to supply a new 2 Tonne crane and gantry to Premiere Pipeline Services, who were expanding their business into this new facility. The contract included the design and specification consultation, installation of all supporting steelwork including new down shop lead enclosed power system and […]

90T Crane Load Test Utilising Water Weights

Overhead Crane Bespoke engineering completed a contract to load test a 90 ton, gantry mounted overhead travelling crane, within a power station turbine hall. One of the initial barriers was the floor capacity beneath the crane, as it was not suitable to support a load of 112.5Tons and allow the use of traditional test weights. […]

Refurbishment of Crane Cross Traverse Rail

Bespoke engineering recently carried out a contract to refurbish the Cross Traverse rail of a 45 ton, gantry mounted overhead travelling crane, within a radiation controlled area of a nuclear power station. The task was to remove the existing, failing rail clips, raise the rail, remove the redundant shock absorbing rail matting, clean area below […]

Laser Controlled Collision Avoidance Equipment

Tata Steel BES was recently awarded a major contract by Tata Engineering Steels for the supply and installation of 10 sets of laser controlled collision avoidance equipment onto their Thrybergh bar mill cranes. The sophisticated equipment could be programmed to the client’s specific requirements and included a series of pre-start checks that the operator had […]

Supply and Installation of New Material Handling Equipment

Supply & Install Bespoke engineering were recently awarded the contract to supply and install 10 Off 1000Kg electrically operated floor mounted pillar jibs complete with chain hoist, and I Off 3000Kg electrically operated KDC Crane for a local engineering company. The contract was placed by a local large engineering company who manufacture canning machinery, and […]

Refurbishment Of Crane Drive Systems

ATB Laurence-Scott Bespoke Engineering Services were successful in their bid to upgrade the crane drives on a 20T Morris crane at ATB Laurence-Scott in Norwich. The up-grade included the supply; installation and commissioning of a new invertor drive system to the Long Travel motion including new motor and the installation of a new brake to […]

Hull Tidal Surge Barrier

Tidal Barrier Gate System The Hull Tidal Surge Barrier is a 200 ton flood defence gate system. This project included replacing the main hoist drive chains, devising new split drive sprockets (the structure had been built around the existing ones) and installing an automatic dogging and jacking system. The project was operated as a CDM […]

Corus Aldwarke – Strongback

We were commissioned by Corus to investigate and find a solution to a problem where a 265 ton ladle crane was wearing out the gears in the hoist gearbox. This problem had been occurring for almost every year of the 20 years it had been in operation. A comprehensive design and feasibility study was undertaken, […]


  • This field is for validation purposes and should be left unchanged.
Close